W2000 Introduction

W2000 is a neutral water-based environmentally friendly cleaning agent specifically developed for the cleaning of SMT printing machine solders paste stencils. It is mainly used for online automatic cleaning and offline manual cleaning of SMT printing machine stencils. It has good solubility and wettability for residual solder paste, and has a good cleaning effect on fine spacing and small holes of the stencil, avoiding bridging phenomenon and reducing solder bead phenomenon during the welding process after printing. The cleaning time is short, and there is no residue after cleaning. After cleaning, it can be quickly dried by wiping, and there is no adverse effect on the subsequent printing process. W2000 is developed using our company's patented technology and is an ideal substitute for traditional solvent based cleaning agents. During the time when using, it is non-volatile and has a long service life.

Enquire now

Sample test

W2000 Product Features

? During the process of using it is non-volatile, has a long service life, and greatly reduces costs.
? Good solubility and wetting power, with good cleaning effect for fine spacing holes in the stencil.
? Using deionized water as a solvent is safe to use and does not require additional explosion-proof measures.
? The formula is mild, with a neutral pH, and excellent material compatibility.
? Low odor and minimal impact on the environment.
? Free of solid substances, no need to rinse after cleaning, no solid residue, and no whitening phenomenon.

W2000 Applicable process

The cleaning of steel stencil by W2000 can be divided into online automatic cleaning of the bottom of the stencil and offline manual cleaning

Apply for product information

{pboot:if('

W2000 neutral water-based cleaning agent is mainly used to clean residual solder paste on SMT printing machine screen boards. The specific applications are listed in the following list.

W2000

'!='')}

W2000 Application

W2000 neutral water-based cleaning agent is mainly used to clean residual solder paste on SMT printing machine screen boards. The specific applications are listed in the following list.

W2000

{else} {/pboot:if}